High Pressure Pump (EVOLUTION TIME VAR)

Product Code: MEC308084, MEC308085

Quick Overview

These series of professional high pressure pumps are the suitable solution with high quality and safety standard for all requirements to build professional misting systems with flow rates ranging from 0.5 up to 5 liters/min. with single-phase power supply. Our built-in digital cyclic timer (”Time” versions only) offers the full efficiency control of the fogging system by direct adjustment of the frequency of mist spray increasing the advantages on water and energy consumption with savings up to 70% if compared to standard systems. Variable-speed motors allow to build independent misting lines/areas

Technical Features
+ heavy-duty high pressure pump
+ 3 ceramic plungers, brass head
+ working pressure : 70 bar ( 1000PSI )
+ built-in bypass water tank  (BPS)
+ safety valve
+ glycerin filled pressure gauge
+ inline mounted high pressure solenoid valve
+ heavy duty force-ventilated motor 3-phase 2 HP,  300 - 1450 RPM
+ ON-OFF switch
+  cyclic digital timer
+ equipped with 1.5 KW single phase to three pase inverter - Soft start
+ low noise
+ automatic variable flow rate
+ can operate several nozzle lines
+ automatic switch-off if all line are closed
+ automatic switch-off if dry running is detected
+ automatic switch-off if no pressure (leakage) is detected
+ automatic switch-on if at least one line is opened
+ automatic switch-off if motor overheats
+ energy saving (absorbed power is proportional to water flow)
+ longer pump life (lower RPM)
+ anti-vibration rubber feet
+ manufactured in compliance with CE regulation


BPS: all units are equipped with By-Pass System (built-in by-pass valve), recirculating the water inside the pump, lowering overheating risk. Fog systems driven by BPS fog pumps do not require any drain valves to empty the pipeline so that no water is wasted on the ground.

TIME 2.0: all units supplied with advanced digital timer 2.0 allow to modulate the operation of the  system, regulating  the mist spray  according to existing environment conditions and therefore saving energy and water.

Please feel free to contact us if you need any further information.