Cooling Principle

Evaporative Cooling

By forcing water through our specially designed misting nozzles, we create a fog of ultra fine water droplets with an average size of 50 microns or less.

These tiny water droplets quickly absorb the energy (heat) present in the environment and evaporate, becoming water vapor (gas). The energy (heat) used to change the water to a gas is eliminated from the environment, hence the air is cooled.

Relative humidity is the amount of moisture in the air compared to the amount of moisture the air could absorb at the same temperature, is a crucial factor in determining cooling potential. The lower the relative humidity, the more water can be vaporized, and the more heat can be removed. Evaporative Cooling can be used effectively in most geographical locations. This is because when temperatures reach their peak during the day, humidity is normally at its lowest point.

Chart For Maximum Potential Drop

Example: If the temperature is 90 degrees F with 30% relative humidity and a maximum temperature drop of 25 degrees F, therefore using the High Efficiency Portable Cooler the temperature could drop to 65 degrees F (subtract the Catalog termperature of 90 degrees F from the maximum temperature drop of 25 degrees F).

Turn any fan into a misting fan with this high pressure 1000 PSI pump module with filtration in a powder coated steel enclosure. Complete with stainless steel misting ring, precision misting nozzles and high pressure feed line.